Link Link Link

common name: giant honey bee (suggested common name)
scientific name: Apis dorsata Fabricius (Insecta: Hymenoptera: Apidae)

Introduction - Distribution - Description - Life Cycle - Biology - Economic Impact - Management - Acknowledgements - Selected References

Introduction (Back to Top)

The giant honey bee, Apis dorsata Fabricius (Figure 1), has a widespread distribution throughout southern Asia, and is not found in North America. Three subspecies of Apis dorsata are recognized: Apis dorsta dorsata, Apis dorsta binghami and Apis dorsta breviligula. This species has a different nest design from that of the western honey bee, Apis mellifera L., in that these honey bees build a single, large, exposed comb under tree branches or under cliffs, rather than in cavities. Apis dorsata has developed an effective colony defense system to protect their exposed combs. Professional honey hunters harvest honey seasonally from Apis dorsata colonies in spite of the colony’s effective defensiveness and hard-to-reach location high in trees or on cliffs.

An adult worker of Apis dorsata.

Figure 1. An adult worker of Apis dorsata. Photograph by Nikolas Vereecken via Flickr.

The nine honey bee species within the genus Apis share many similar morphological, behavioral and physiological traits. Here we highlight some of the unique characteristics of Apis dorsata and provide some comparisons to those of other honey bee species.

Distribution (Back to Top)

Apis dorsata is found throughout the southern countries of Asia, including Malaysia, Indonesia, and the Philippines (Figure 2). The greatest number of Apis dorsata colonies are found in dense forest areas or on cliffs, but nests are occasionally found in urban areas on building ledges (Figure 3).

The distribution of Apis dorsata.

Figure 2. The distribution of Apis dorsata. Figure by Sémhur Canuckguy, via Wikimedia Commons.

Separate Apis dorsata colonies aggregated on a building ledge.

Figure 3. Separate Apis dorsata colonies aggregated on a building ledge. Photograph by Simon Croson.

Description (Back to Top)

Honey bees are eusocial insects and therefore have overlapping generations, cooperative brood care, and reproductive castes (Mortensen et al. 2015). Each Apis dorsata colony typically contains one queen, several drones, and thousands of worker bees. Apis dorsata looks very similar to Apis mellifera, but is larger in size. Apis dorsata workers can be up to 3 cm (1.2 in) in length, which is almost twice the length of an Apis mellifera worker; thus they are known as the giant honey bees. In most honey bee species, the reproductive bees (queens and drones) are larger than the workers; however, there is very little difference in body size between the reproductive bees and workers in Apis dorsata.

The queen lays all of the eggs for the colony and is usually the mother of all of the workers and drones within the colony. She is the sole reproductive female in the colony and has a larger abdomen as her reproductive organs are more developed (Figure 4). Queens are usually darker than workers.

An Apis dorsata queen surrounded by workers.

Figure 4. An Apis dorsata queen surrounded by workers. Photograph by Nikolaus Koeniger, Martin–Luther-Universität, Institut für Biologie, Bereich Zoologie.

The male honey bees are called drones and are easily identifiable because they have large eyes, short, round abdomens, and lack a stinger (Figure 5). Drones are only produced during the reproductive season and leave their home colony to mate with queens from other colonies. Each colony will produce more than a thousand drones seasonally.

An Apis dorsata drone (left) next to a worker (right).

Figure 5. An Apis dorsata drone (left) next to a worker (right). Photograph by Nikolaus Koeniger, Martin–Luther-Universität, Institut für Biologie, Bereich Zoologie.

Adult workers have a relatively short life span (about two months). Just as in other honey bee species, the adult workers have a corbiculum (pollen basket) on their hind tibia (section of leg) and plumose (branched) body hairs that aid in pollen collection. The adult workers have a modified ovipositor that is used as a stinger. When a bee stings, its stinger remains embedded in the perceived threat and is torn away from its abdomen, thus killing the bee. Workers perform all other colony tasks such as foraging for nectar and pollen, producing honey, tending the brood (eggs, larvae, and pupae), and protecting the nest from predators.

Life Cycle (Back to Top)

The life cycle and life stages of Apis dorsata are the same as those in all other honey bee species (see and the life cycles of Apis mellifera and Apis cerana). Honey bees are holometabolous insects, which means they undergo four separate life stages (egg, larva, pupa, and adult).

Egg: A queen will lay one egg in an individual wax cell at a time. Eggs are small, white, and oval; they look similar to a grain of rice. After three days, a larva will hatch from the egg.

Larva: The larvae are small, white, and maggot-like. They remain in their individual cells. They are fed a steady diet of a protein-based liquid produced by younger adult workers. For six days, the larvae will eat until their body weight attains that of a fully developed adult. They are usually found lying in the bottom of a wax cell in the shape of a letter C.

Pupa: Once the larvae are ready to pupate, the workers cover the cell with a wax capping. The pupa will remain undisturbed for 12 days.

Adult: After completing the final molt and eclosing from the pupal casing, the adult bee will exit the cell by chewing through the wax capping.

All honey bee species are superorganisms in that whole colonies, rather than individual bees, are considered to be the biological unit. One colony can split into two colonies once the colony becomes large in size and there are abundant food resources (nectar and pollen). This colony-level reproduction is known as swarming (DeBerry et al. 2012).

The lifespan of Apis dorsata workers is not well characterized. Compared to Apis mellifera workers, Apis dorsata seems to live significantly longer, especially during migration swarms when workers will sometimes travel more than two months to reach a new destination and produce a new generation of bees (Koeniger et al. 2010).

Biology (Back to Top)

Apis dorsata builds open nests that hang from under thick tree branches or under cliffs (Figure 6). They build a single large comb up to 150 cm in length and 70 cm tall. The comb is permanently covered by a curtain of up to 100,000 worker bees (Figure 7). This curtain is several layers of bees thick and forms a protective barrier separating the vulnerable brood from the environment. This curtain is sufficient to protect the nest during storms with heavy wind and rain.

Separate Apis dorsata colonies aggregated in a bee tree.

Figure 6. Separate Apis dorsata colonies aggregated in a bee tree. Photograph by Rajesh Dangi via Wikimedia Commons.

The large body size of Apis dorsata allows these bees to have a greater flight and foraging range than those of other honey bee species. Apis dorsata colonies can perform seasonal long-distance migrations in order to exploit the nectar and pollen resources available at different times throughout many parts of southern Asia (Oldroyd et al. 2000). The colony leaves behind an empty comb when it departs from a nest site. Interestingly, the same colony has been observed to return to the exact same branch six months later, even though the bees that knew of the old nesting location would have died long before.

There are only minor differences in the three sub-species of Apis dorsata. Apis dorsata dorsata is the most widespread subspecies in southeast Asia while Apis dorsata breviligula and Apis dorsata binghami are only found in specific locations. Apis dorsata breviligula is different from Apis dorsata dorsata in that it has white abdominal stripes and a shorter tongue, and is only found in the Philippines. Apis dorsata binghami also differs slightly from Apis dorsata dorsata in that it has a longer tongue and wings and is only found on Sulawesi, an island of Indonesia.

Apis dorsata has been described as one of the most dangerous animals of the southeastern Asian jungles due to their threatening defensive behaviors. It is considered the most defensive of all of the honey bees, even more defensive than the African honey bee (Ellis and Ellis 2009; Hall et al. 1995). Their main weapons are stingers that are up to 3 mm long and easily penetrate clothing and even the fur of a bear. Attached to the stingers are large venom glands with accompanying muscles that pump the venom into the skin, thus delivering a painful sting. Large numbers of Apis dorsata attack a perceived threat, though only a few provide the painful stings because the bees will die shortly after stinging. The other bees will buzz loudly and bite the threat to deter the threat, without risking the life of many individuals.

A multiple layer curtain of Apis dorsata formed by hanging workers.

Figure 7. A multiple layer curtain of Apis dorsata formed by hanging workers. Photograph by Simon Croson.

These bees have evolved a unique method of defense to deter predators from attacking their exposed nests. An alarmed guard bee will fly back to the nest and, with an exposed stinger, run in a zigzag pattern along the curtain of bees. The bees will then run to the lower rim of the comb and create large thin chains of bees while making a hissing sound. This act not only prepares the guard bees for attack, but also makes the nest look larger than it is. This defense is particularly useful against bird predators that try to rip sections of brood from the comb, because the birds often attack the bottom of the comb, grabbing only handfuls of bees.

Apis dorsata uses another fascinating method of defense known as shimmering. Shimmering involves a display of waves which moves across the surface of the nest in a fraction of a second as the bees raise their abdomens in a sequential order. These waves originate from individual bees which perceive a predator and raise their abdomen first, invoking a similar response from the surrounding bees. The visual display of shimmering is thought to intimidate potential threats such as predatory wasps, birds, and mammals.

Economic Impact (Back to Top)

Apis dorsata is considered to be extremely important to both honey gatherers/hunters and agricultural producers in southern Asia. Unlike Apis mellifera and Apis cerana, Apis dorsata colonies cannot be transported for pollination purposes; therefore, locals are mainly interested in harvesting honey from colonies.

There is much to gain for locals willing to risk harvesting honey from these colonies because Apis dorsata colonies are so large and such efficient honey producers. Some of the larger colonies can contain up to 15 kg (33 lbs.) of honey. In addition to honey, the wax and bee brood are also sold at a significant price.

Although the bees are not managed for pollination, many crops throughout southern Asia depend upon Apis dorsata. Some of the major crops thought to be heavily dependent upon Apis dorsata pollination include: cotton, mango, coconut, coffee, pepper, star fruit, and macadamia. Currently, there are no reliable estimates on the actual economic contribution of Apis dorsata pollination.

Apis dorsata is also the natural host of the Tropilaelaps mite, a devastating parasite with an expanding distribution. Apis mellifera is not a natural host of Tropilaelaps, but can be parasitized by the mite in areas where both Apis dorsata and Apis mellifera are present. This poses a significant threat to beekeepers world-wide, as Tropilaelaps can increase colony losses, negatively affecting the commercial beekeeping industry (Mortensen et al. 2014).

Management (Back to Top)

Apis dorsata is not managed like other honey bee species because they are an open-nesting species. Attempts to place Apis dorsata colonies in wooden Langstroth hives traditionally used for Apis mellifera and Apis cerana have all failed (Koeniger et al. 2010), as these bees have not evolved to live in dark cavities. Instead of beekeeping to obtain honey, wax and brood, honey gathering from feral Apis dorsata colonies is the common practice in many regions of the bee’s distribution.

For centuries, people throughout southern Asia have gone through great risk to harvest honey from Apis dorsata colonies. Aggregations of Apis dorsata colonies are usually on the tallest trees or cliffs, thus presenting a major challenge to access. Furthermore, the natural distribution of these bees overlaps with that of tigers, which have been known to kill honey hunters. Traditional honey gathering is usually done on a moonless night to minimize the number of flying bees once the colony is disturbed. Either ropes or makeshift ladders are used to reach the top of the trees or cliffs and a flame is used to knock the bees off of the comb. Often times honey hunters harvest the whole nest to obtain both the honey and the brood; however, recent conservation efforts are pushing honey gatherers to just cut away the sections of honey comb (Figure 8) instead of destroying the whole colony.

Collecting honey from an Apis dorsata colony.

Figure 8. Collecting honey from an Apis dorsata colony. Photograph by Tim Laman via www.timlaman.com.

Rafter beekeeping is practiced in certain regions of Vietnam, Cambodia and Indonesia with submerged forests. A tikung is a carved plank of wood under which Apis dorsata swarms build nests. Tikung planks are notched at both ends in order to attach the plank to sturdy branches a few feet above the waters surface. Similar to traditional honey gathering in bee trees, collecting honey from tikung nests is done on moonless nights and the bees are brushed away with a torch. The tikungs are approached by gatherers in small boats and the honey comb is cut with a wooden knife, as an iron knife is traditionally thought to deter future swarms from using that tikung. The average honey yield per tikung is about 6-10 kg. These tikung planks are only attractive in areas with low vegetation as Apis dorsata colonies usually prefer tall trees.

Selected References (Back to Top)